| Activate PowerStartup Power | 33KW |
| Normal working powerOperation Power Consumption | 8KW |
| Control systemControl System | PC+PLC |
| Spray moveSpraying movement | Step into the motor(Step motor) |
| Spray pressureSpray Pressure | 0.2Mpa~0.4Mpa |
| Welder flow controlFlux Flow Arrange | option |
| Automatic weldingAuto Fill Flux | Plot(Standards) |
| The windExhaust | It's windy(Top exhaust) |
| Windpipe diameterExhaust Ducting Diameter (mm) | Φ250 |
| Wind pump powerExhaust fan power | 750W |
| Preheating modePreheating Mode | The breeze/Infrared(Convection/IR emitter) |
| Temperature Control MethodControl Mode | PID |
| Number of preheat zonesPreheating Zone Number | 3 |
| Length of preheat areaPreheating Length (mm) | 1800 |
| Preheat temperature adjustable rangePreheating Temperature | Room temperature(Room temperature) ~200°C |
| Preheating timeWarm-up Time(min) | 12min(setting:150°C) |
| Width RangePCB Width(mm) | 50~350 |
| PCBTransfer DirectionConveyor Direction | L→R (Option:R→L) |
| Transfer speed rangeConveyor Speed(mm/min) | 500~1800 |
| AllowPCBWidget HeightAvailable Component Height(mm) | Move(Top) 120Down(Bottom) 15 |
| Speed ControlConveyor Speed Control Mode | Turner closed-ring, no velocity(Closed-loop stepless speed regulation Inverter) |
| ClawFingers | Slinky claws(Spring Pressing Finger);D-40A duck's paw(D-40 Type Finger);Two hook claws(Double-hook Finger);Heavy double hook claw(Heavy type double hook finge)One of them(Opions) |
| Track angleConveyor Angle | 4~7° |
| Type of tin furnaceType of solder Pot | Mechanical(Motor drive) |
| Tin stove materialSolder Pot Material | Cast iron(Casting Iron) |
| The summit modeWave Height Adjustment | Computer digital control(Digital Control by PC) |
| The cooling methodCooling Method | Force cold(Air Cooling) Option:Cold water machine(Water cooling) |
| Heating power of tin furnacesHeater Power | 13. 5KW |
| Maximum temperature of tin furnaceSolder Pot Temperature | 300°C |
| Tin capacitySolder Pot Capacity | 480KG |
| Wave powerWave Drive Power | 180W X 2 3PH 220VAC |
| The temperature of the tin furnaceSolder Pot Warm-up Time | 150min(setting:250°C) |
| The temperature control of the furnaceTemperature Control Mode | PID |
| Claw-washing systemFinger Cleaning System | Brush(Brush) |
| Transport heightConveyor Height(mm) | 750±20 |