| SMT Applications | SMA, solder paste, conductiveadhesives |
| Semiconductor Packaging | Underfill, encapsulant, thermalgrease, lid seal, die attach |
| XY AXIS | |
| XY Placement Accuracy* | +/-50 microns @ 3 sigma |
| Repeatability* | +/-15microns @ 3 sigma |
| Speed | 500 mm/sec (19.7"/sec) |
| Encoder Resolution | 2 microns |
| Gantry Drive System | Closed-loop DC servo,ballscrew drive |
| Z AXIS | |
| Z Axis Accuracy* | +/-25 microns (0.001")@ 3 sigma |
| Repeatability* | +/-10microns @ 3 sigma |
| Speed | 188 mm/sec (7.38"/sec) |
| Encoder Resolution | 0.3 microns |
| Z-Axis Type | Closed-loop DC servo,Ballscrew drive |
| Z-Sense Type | Mechanical probe or CCD laser |
| DOT PLACEMENT PERFORMANCE | |
| 3.00mm pitch** | 30,000 DPH |
| 1.27mm pitch** | 36,000 DPH |
| IPC 9850 test PCB** | 23,000 DPH |
| TRAVEL | |
| Max Dispense Area (XY)*** | 508 mm x 508 mm (20" x 20") |
| Z-Axis Travel | 100 mm (4") |
| BOARD HANDLING | |
| Conveyor Type | Flat belt with auto width adjust |
| Min Conveyor Width | 25.4 mm (1.0") |
| Above Board Clearance | 25.4 mm (1.0") |
| Underboard Clearance | 30.5 mm (1.2") |
| Transport Height | 790 mm to 965 mm(32.1" to 38") |
| Protocol | SMEMA |
| Conveyor Options SMT | SMT edge clamps w/vacuumsupport |
| Conveyor Lift Chucks | Up to three 13" x 10" chucks |
| Conveyor Weight Capacity*** | 3.66 kg total (8.1 lbs.)w/ 3 lift chucks |
| Lift Chuck Options | Heated contact w/vacuum ornon-contact (convection) |
| Chuck Temperature Range | Ambient to 130°C |
| DISPENSE METHOD | |
| Pump Temperature Range | Ambient to 70°C |
| Pump Control | Closed-loop dc servo axis |
| SmartStream | Non-contact and low levelsensor included |
| DC Servo Pumps | Rotary positive displacementpumps for dot or line applicationswith low level sensor included |
| STANDARD FEATURES | |
| Auto-Width Conveyor | XYZ calibration station |
| Pre-dispense Station | Purge station |
| Flip Chip Calculator | Auto-vision alignment |
| Vision System | Split beam on-axis illumination —red or blue light |
| Computer | Internally mounted desktop |
| Operating System | Microsoft Windows XP |
| Program Storage | Local hard drive, CD-RW, Ethernetand USB ports |
| Program Method | Teach camera, off-lineprogramming, or text filedownload |
| Pipeline conveyor | Parallel product transfer |
| FACILITIES | |
| Power Requirements | 208 to 240 VAC, 50/60 Hz 20A |
| Air Supply Requirements | 10 CFM (4.7l/s) at >80 PSI(5.5 bar) filtered @ 5 microns |
| Machine Footprint(W x D x H) | 1270 mm x 1475 mm x 1730 mm(50" x 58" x 68") |
| Machine Weight | 680 kg (1500 lbs.) |
| Crated Weight | 890 kg (1962 lbs.) |
| Crated Dimensions(W x D x H) | 1752 mm x 2133 mm x 2032 mm(69" x 84" x 80") |
| Industry Standards | CE, SMEMA, SEMI S2 & S8 |
| OPTIONS | |
| Dual Mode Weight ScaleNeedle CleanerTime Pressure DispensingPrewire for HeatSynchronous Dual Head | Die edge detection algorithmsNeedle DetectorSecondary Z Axis |
