| Id | Part No. | Name | Count |
| 1 | 86274 | Safety glass plate module 750 | |
| 2 | 93324 | Hinge EMKA Type 1110 | |
| 3 | 6VER2520 | Lock | |
| 4 | 6STELLFM16X155 | Adjusting foot | |
| 5 | 6VERSCHL02531 | Key for control cabinet | |
| 6 | 86699 | Lever element | |
| 7 | 89801 | Gas spring (300 N) * | |
| 8 | 41521 | Flourescent lamp 18 W | |
| 9 | 135393 | Adjusting foot | |
| 10 | 164880 | Adjusting sheet for solenoid-switch | |
| 11 | 163336 | Switch holder | |
| 12 | 6GN808-M5-45 | Pressure screw (Neopren) | |
| 13 | 86292 | Safety glass plate without cutout, module 1100 | |
| 14 | 231922 | Safety glass plate with cutout, module 1100 | |
| 15 | 6VERSCHLU2531 | Key for control cabinet | |
| 16 | 182525 | Gas spring (500 N) * | |
| 17 | 261469 | Safety glass plate with cutout, module 1300 | |
| 18 | 236505 | Hinge EMKA Type 1110-U121, right side | |
| 19 | 146183 | Inductive sensor PNP, NC | |
| 20 | 146185 | Inductive sensor PNP, NO | |
| 21 | 135733 | Adjusting screw | |
| 22 | 155309 | Axis of rotation for height adjustment | |
| 23 | 155662 | Energy chain | |
| 24 | 155639 | Energy chain X-axis Fluxer | |
| 25 | 6FEDKL-G-D6-Z | Spring steel clamp | |
| 26 | 6SKLS101-12 | Hose clip, Euroclip | |
| 27 | 6KATCI07-10 | Cable bushing | |
| 28 | 216457 | Tooth belt 16AT5,1545 mm | |
| 29 | 216458 | Tooth belt 16AT5, 2215 mm | |
| 30 | 213039 | Tooth belt, bulk stock | |
| 31 | 204050 | Motor/gear combination, complete | |
| 32 | 213037 | Coupling unit, motor | |
| 33 | 213036 | Sliding piece | |
| 34 | 213038 | Coupling (Shaft) | |
| 35 | 226780 | Sliding piece (red point) | |
| 36 | 172047 | Spray head holder, fix | |
| 37 | 145269 | Spray head holder, adjustable | |
| 38 | 6M03X010Z0914 | Set screw | |
| 39 | 6M03X003Z0913 | Set screw M03X003 zinc-plated ISO 4026/DI N 913 | |
| 40 | 172048 | Spray head holder, adjustable | |
| 41 | 172063 | Groove block | |
| 42 | 184463 | Guide rail with slider | |
| 43 | 74763 | Catch bolt | |
| 44 | 171954 | Adjustable clamping lever | |
| 45 | 23643 | Laser sensor | |
| 46 | 114126 | Pressure piece M8 | |
| 47 | 231417 | Evaporator | |
| 48 | 203147 | Filter with bolting | |
| 49 | 222155 | Cylinder, 0 10, stroke = 75 mm | |
| 50 | 179756 | LED festoon lamp , 12 V AC/DC | |
| 51 | 222148 | Cover glass, transparent | |
| 52 | 222111 | Fan | |
| 53 | 222223 | Filter | |
| 54 | 182569 | Camera, 1,3 Mega pixels, SXGA 1/2", CMOS | |
| 55 | 182573 | Extension ring, C-mount, 10 mm | |
| 56 | 182571 | Lens, Lensagon | |
| 57 | 182574 | Counter nut, Lensagon, M12 x 0,5 | |
| 58 | 182572 | Adaptor, C-mount/S-mount, Lensagon, wihout fig. | |
| 59 | 269741 | Schutze type area spray head, round shape, 0,2 | |
| 60 | 276596 | Holder for area-spray head "Schutze" | |
| 61 | 152270 | Energy chain | |
| 62 | 174537 | Energy chain | |
| 63 | 175813 | Steel band 38 mm x 1167 mm | |
| 64 | 216456 | Tooth belt 25AT10HPF; 2440 mm | |
| 65 | 175815 | Wearing part package steel band deflection | |
| 66 | 253569 | Blanket for positioning system: EM113-20-00A (not shown) | |
| 67 | 139290 | Energy chain | |
| 68 | 175810 | Tooth belt 25AT10HPF; 2400 mm | |
| 69 | 175814 | Steel band 38 mm x 1100 mm | |
| 70 | 175816 | Motor/gear combination -> 2010 | |
| 71 | 191607 | Motor/gear combination 2010 --> | |
| 72 | 175817 | Motor/gear combination -> 2010 | |
| 73 | 191608 | Motor/gear combination 2010 —> | |
| 74 | 175818 | Assembly set limit switch | |
| 75 | 175819 | Cam set | |
| 76 | 175820 | Coupling | |
| 77 | 6ZR0425-5M-15 | Tooth belt 425-5M-15 | |
| 78 | 112207 | Tensioning kit | |
| 79 | 23567 | Servo drive with resolver | |
| 80 | 209659 | Lifting spindle, complete | |
| 81 | 175812 | Steel band 38 mm x 1250 mm | |
| 82 | 175811 | Tooth belt 25AT10HPF; 2290 mm | |
| 83 | 142681 | Guide rail, L = 308 mm | |
| 84 | 149199 | Guide wagon | |
| 85 | 114287 | Solid mounting | |
| 86 | 142731 | Lifting spindle, complete, 25 x 5 * | |
| 87 | 155072 | Ball nut * | |
| 88 | 121899 | Rubber bumper | |
| 89 | 6SCHMNI6X1-90 | Grease nipple, 90° | |
| 90 | 89042 | Grease nipple | |
| 91 | 184736 | Ball nut * | |
| 92 | 253483 | Blanket for positioning system: EM113-22-00 (not shown) | |
| 93 | 182134 | Connector, MIO x 1 | |
| 94 | 182135 | Coupling MIOx 1 | |
| 95 | 182126 | Plastic disk | |
| 96 | 182130 | Shock absorber | |
| 97 | 116079 | Straight edge connector | |
| 98 | 182132 | ISO-Cylinder | |
| 99 | 190486 | Fixing block | |
| 100 | 6M06X025E0933 | Hexagonal screw M6 | |
| 101 | 192581 | Positioning bolt * | |
| 102 | 6M04X004E0916 | Set screw | |
| 103 | 111800 | Locking ring | |
| 104 | 103408 | Y-piece | |
| 105 | 100964 | Angular-connector | |
| 106 | 100637 | Reduction piece, straight, pluggable | |
| 107 | 170367 | Joint clip | |
| 108 | 97965 | Straight screwing M5, stainless stell | |
| 109 | 85950 | Cylinder, 2-acting 0 16, stroke=20 Temp, resistant | |
| 110 | 170366 | Swivel head M6 | |
| 111 | 6M03X008Z0912 | Screw M3 | |
| 112 | 6SA08X0.50 | Washer 8/14X0,5 DIN988 | |
| 113 | 6SER-A080471 | Circlip A 8x0,8mm, DIN 471 | |
| 114 | 143513 | Collar bush | |
| 115 | 26315 | Groove nut, flute width 6 M4 | |
| 116 | 6ZIS049 | Groove nut STM5 | |
| 117 | 169520 | Sliding piece (chain tensioner) | |
| 118 | 108981 | Distance bush | |
| 119 | 6LA624Z | Bearing | |
| 120 | 143668 | Deflection disk | |
| 121 | 170047 | Chain wheel Z=15 | |
| 122 | 6SER-A170471 | Circlip A 17 DIN 471 | |
| 123 | 6LA619032RS | Bearing | |
| 124 | 6FEDZ-094I | Spring | |
| 125 | 144377 | Cylinder, 0 16, stroke =20 mm * | |
| 126 | 171388 | Triflex Chain, size 40 | |
| 127 | 231535 | Excentric pressing unit with chamfer | |
| 128 | 230071 | Pan head screw M5 with shoulder, 0 7,9 | |
| 129 | 6BO232 | Fork head | |
| 130 | 170766 | Support, Senor LK6, top | |
| 131 | 170750 | Sensor holder, bottom, LK6 | |
| 132 | 6ZT00211 | Pipe clamp DIN 72571 | |
| 133 | 170207 | Pan head screw M5 | |
| 134 | 6SA08X1.00 | Washer 8/14X1,0 DIN988 | |
| 135 | 6ZlIS049 | Groove nut STM5 | |
| 136 | 117869 | Motor, Dunker, BG44x25SI/PLG S 32:1 | |
| 137 | 143509 | Coupling 0 20x30 | |
| 138 | 126740 | Screw-in angle 0 4 mm, 1,8" | |
| 139 | 43674 | Cylinder, 2-acting 0 20, stroke=25 Temp, resistant | |
| 140 | 126369 | Straight plug connection M5,0 4 mm | |
| 141 | 164014 | Cylinder, 2-acting 012, stroke=25 mm | |
| 142 | 238057 | Fork head G6xl2 SL MBO | |
| 143 | 143514 | Chain G52 05B-1 | |
| 144 | 6BUFL08X12X12 | Flange bushing BP 25 C 08 x 12 x 12 | |
| 145 | 143664 | Sliding piece | |
| 146 | 143665 | Fit screw M4 | |
| 147 | 6PSF2X2X10A | Feather key DIN 6885 2x2x10 | |
| 148 | 170791 | Jackscrew M12X1 | |
| 149 | 143511 | Pressure spring VD-177 | |
| 150 | 143645 | Chain guide, fixed | |
| 151 | 144383 | Fork head G6xl2SLMBO | |
| 152 | 6LA624ZZ | Bearing | |
| 153 | 6PSF2X"X10A | Feather key DIN 6885 2x2x10 | |
| 154 | 170777 | Fastening angle (roller-chain conveyor) | |
| 155 | 126744 | Plug-in connection 04 mm 1/8" | |
| 156 | 126195 | L-Screw-in angle M5, 0 4 mm | |
| 157 | 143677 | Key | |
| 158 | 143692 | Tappet | |
| 159 | 6B0306 | Fork head | |
| 160 | 6FED078-VD | Spring, stainless steel | |
| 161 | 143673 | Chain guide, fixed, adjustable | |
| 162 | 143640 | Sliding piece, redirection | |
| 163 | 6BUFLO8X12X12 | Flange bushing BP25C08x12x12 | |
| 164 | 143526 | O-belt 0 3-175, endless | |
| 165 | 211062 | Deflection roller, 0 20 mm | |
| 166 | 128566 | Screw-in angle with cap nut | |
| 167 | 6FEDTEL-C14 | Disk spring, B-type, DIN 2093-C16 | |
| 168 | 102588 | Countersunk screw | |
| 169 | 144818 | Chain 8,00 x 3,16 05B-1, bulk stock | |
| 170 | 6KES05B-1G52NSB | Chain joint | |
| 171 | 143638 | Chain pinion 05-Z9 | |
| 172 | 155902 | Chain guide | |
| 173 | 269848 | Chain guide, fixed | |
| 174 | 242046 | Fork head G6xl2 KL MBO | |
| 175 | 204664 | Triflex Chain, size 40 | |
| 176 | 6SER-A060471 | Circlip A 6 DIN 471 | |
| 177 | 281506 | Key | |
| 178 | 281572 | Tappet | |
| 179 | 281723 | Tappet head | |
| 180 | 217175 | Gassing hose, lower side | |
| 181 | 281726 | Key | |
| 182 | 269849 | Chain guide, flexible, special design | |
| 183 | 261375 | Gassing hose | |
| 184 | 265937 | Separation (conveyor) | |
| 185 | 156387 | Tooth belt AT5-16-225 | |
| 186 | 160938 | Motor, Dunker, BG65x25SI/PLG52 S 400:1 | |
| 187 | 156277 | Synchronized pulley | |
| 188 | 169941 | Synchronized pulley | |
| 189 | 228631 | Compensation coupling LA Alu 0 8 L 38,1 | |
| 190 | 171168 | Spline shaft (single track) | |
| 191 | 170398 | Spline shaft 11X14 | |
| 192 | 6Zi5049 | Groove nut STM5 | |
| 193 | 6ETHE-IR9 | Thermocouple complete | |
| 194 | 157140 | IR-heater 1500W | |
| 195 | 156915 | Reflector sheet | |
| 196 | 156937 | Glass plate | |
| 197 | 156941 | Radiator socket | |
| 198 | 173139 | Gas spring, stroke = 200 mm | |
| 199 | 127093 | Telescopic rail HG26-250 | |
| 200 | 173141 | Clamp lever 20° M5 x 8 | |
| 201 | 177458 | Spring-loaded shaft 0 25 mm / L = 531 mm | |
| 202 | 6GR-GN564 | Bow-type handle insulated, GN-564-25-160 | |
| 203 | 6ZIS023 | Groove nut STM4 | |
| 204 | 199865 | Gas spring (350 N) | |
| 205 | 176974 | Tubular heating element 2,5 kW | |
| 206 | 6IN774 11 | Thermocouple, shaped | |
| 207 | 6ZIS022 | Groove nut, flute width 5 M5 | |
| 208 | 154175 | Solder level measuring point, upper part | |
| 209 | 154185 | Solder level measuring point, bottom part | |
| 210 | 111799 | SCHNORR M5 locking ring | |
| 211 | 6M05X010E0933 | Screw M5xl0 | |
| 212 | 143527 | Cylindrical pin, 0 4 x 10 mm | |
| 213 | 214493 | Tube, slicone, 0 12 mm, bulk stock | |
| 214 | 112055 | SCHNORR M4 locking ring | |
| 215 | 182167 | Coupling, 6 mm | |
| 216 | 188212 | Flap for clamp | |
| 217 | 205899 | Cover (soldering pot) | |
| 218 | 177110 | Base upper part, standard | |
| 219 | 150470 | Hexagonal screw M4 V4A | |
| 220 | 248124 | Hose clamp SM9-NW12 | |
| 221 | 219986 | Base riser, bottom part | |
| 222 | 213516 | Tube (pot) | |
| 223 | 119223 | Screw M4x30 | |
| 224 | 150471 | Screw M4x6 | |
| 225 | 222728 | Distance bush | |
| 226 | 222722 | Inner ring | |
| 227 | 6M05X005E0914 | Set screw | |
| 228 | 234258 | Pipe, solder feeding | |
| 229 | 243136 | Base block for locking | |
| 230 | 243084 | Spring plate for locking | |
| 231 | 243083 | Distance bush | |
| 232 | 243079 | Stopper | |
| 233 | 6M04X020E0933 | Screw M4x20 | |
| 234 | 265947 | Antisurge baffle | |
| 235 | 243308 | Cover (soldering pot) | |
| 236 | 154149 | Flap | |
| 237 | 177098 | Bottom part base | |
| 238 | 6M05X008E7991 | Countersunk screw M5x8 | |
| 239 | 145633 | Screw M4x25 | |
| 240 | 6VSE-GAI06PLR | Screw connection | |
| 241 | 6BO426 | Female connector with male thread | |
| 242 | 153646 | Sealing ring, copper | |
| 243 | 6BO425 | Coupling plug with cap nut | |
| 244 | 179184 | Cover (soldering pot) | |
| 245 | 178285 | Half shell, upper part | |
| 246 | 213515 | Half shell, bottom part | |
| 247 | 6M04X025L0933 | Screw M4x25 | |
| 248 | 91248 | Hexagonal nut | |
| 249 | 6M06X016E0933 | Screw M6xl6 | |
| 250 | 266035 | Antisurge baffle | |
| 251 | 266037 | Bulkhead for antisurge baffle | |
| 252 | 243547 | Screw M4x45 | |
| 253 | 105128 | Washer U04 | |
| 254 | 243077 | Base block for locking | |
| 255 | 243081 | Stopper plate, spring | |
| 256 | 6M04X012E0933 | Screw M4xl2 | |
| 257 | 222724 | Inner ring | |
| 258 | 243087 | Spring guard plate | |
| 259 | 243092 | Spring guard plate, component clearance 20 mm | |
| 260 | 154130 | Pump tube | |
| 261 | 154113 | Spring seat | |
| 262 | 105387 | Pressure spring | |
| 263 | 138253 | Screw M4x20 | |
| 264 | 18626 | Locking ring | |
| 265 | 154131 | Pump tube, complete | |
| 266 | 6SPV-TL806B | Closure | |
| 267 | 192323 | Graphite sealing ring | |
| 268 | 153855 | Lock screw L2C | |
| 269 | 145982 | Electro magnetical pump, type B02 (标准) | |
| 270 | 266106 | Electro magnetical pump, type DOI (选装件) | |
| 271 | 153876 | Pump centering ring | |
| 272 | 154236 | Thermocouple 2xNICR-NI D3 with plug | |
| 273 | 6HKRI36H36 | Ring heater (pump tube) 150 W -> 02/2015 | |
| 274 | 273536 | Heating element, pump sump, 230 V / 150 W 03/2015 -> 10/2017 | |
| 275 | 312371 | Heating element, pump sump, 230 V / 150 W 10/2017 -> | |
| 276 | 153896 | Ring heater (pot) 1000 W | |
| 277 | 109650 | Locking ring | |
| 278 | 219468 | Cylindrical pin | |
| 279 | 242526 | Storage tray | |
| 280 | 242505 | Magnet (neodym) | |
| 281 | 6M04X006E7380 | Screw M4x6 | |
| 282 | 243429 | Storage tray, dual track | |
| 283 | 6ET00119 | 15 mm M4 spacer bolts | |
| 284 | 310670 | Gassing ring with lower part | |
| 285 | 242714 | Lock screw M20 x 1 | |
| 286 | 182166 | Connector, 6 mm | |
| 287 | 153649 | Sealing ring, copper | |
| 288 | 146054 | Sealing ring (Silicone) | |
| 289 | 252783 | Gassing ring | |
| 290 | 242715 | Gassing cap, upper part, 0 24 mm | |
| 291 | 6RCUD12.5X18 | Sealing ring, copper | |
| 292 | 243331 | Lock screw M12 x 1,5 | |
| 293 | 242746 | Gassing cap, 0 34 mm | |
| 294 | 243303 | Tool for gasification ,无插图 | |
| 295 | 213024 | Cleaning brush stainless steel ,无插图 | |
| 296 | 28444 | TAS-WT 1400°C | |
| 297 | 233845 | Cable gland M12 x 1.5 | |
| 298 | 243328 | Spacer pipe for heating element | |
| 299 | 249116 | Hot air heating element | |
| 300 | 103175 | Glue | |
| 301 | 145960 | Probe | |
| 302 | 6SPTFE06X1 | Hose 0 6/4, PTFE, bulk stock | |
| 303 | 6ET00158 | Differential pressure switch | |
| 304 | 113826 | Flow meter 0.05 - 0.35 l/min | |
| 305 | 6ISK479008A | Drive | |
| 306 | 6ESCHN23 | Sensor (inductive) | |
| 307 | 162002 | Support roller | |
| 308 | 6BUZY05X08X08 | Bushing | |
| 309 | 85258 | Feed gear | |
| 310 | 22123 | Guiding roller | |
| 311 | 6FEDVD199 | Spring | |
| 312 | 162003 | Protective tube | |
| 313 | 160870 | Screw 1/4"X5/16", (stainless steel) | |
| 314 | 171715 | Glass plate, Floatglass | |
| 315 | 109126 | 1/3" color-CCD camera CS mount | |
| 316 | 109129 | 25 mm C-Mount lens Fl,4 | |
| 317 | 109131 | Polarizing filter, linear | |
| 318 | 171713 | Festoon lamp - Holder | |
| 319 | 186541 | llluminant, halogen, cold light 24V/ 35W | |
| 320 | 186504 | Glass mirror 58 x 32 x 3 mm | |
| 321 | 186503 | Glass plate 38 x 45 x 3 mm | |
| 322 | 186485 | Halogen spot, camera BG | |
| 323 | 150785 | Catch bolt | |
| 324 | 6LA6082RS | Bearing | |
| 325 | 187338 | Swivel head M6, plastic | |
| 326 | 198509 | Cover glass, transparent | |
| 327 | 182901 | Protective grid (Papst) | |
| 328 | 202474 | Fan (Papst), 24V DC | |
| 329 | 118351 | Hose, inside 0 51 mm, temperature resistant up to 310° C | |
| 330 | 236235 | Filter | |
| 331 | 200106 | Laser distance sensor | |
| 332 | 6SPANVERS-01 | Clamp closure with spring | |
| 333 | 163756 | Gas spring (230 N) | |
| 334 | 6X00033 | Silicone profile, heat-resistant | |
| 335 | 6ISK582107Q0A | Silicone loop, preassembled | |
| 336 | 6ZT00096 | Cera insulating paper | |
| 337 | 6MOSWF11 | Motor with worm drive | |
| 338 | 6ZR0305-5M-09 | Tooth belt | |
| 339 | 6LAKB1038-20 | Ball bush | |
| 340 | 6HK4L10002550 | Radiator, flat, 4 holes | |
| 341 | 6ISK582001022 | Pressure plate | |
| 342 | 6ISK582001023 | Insulation plate | |
| 343 | 6SU10.5Z9021 | Disc, galvanized | |
| 344 | 6M100000E0934 | Hexagonal nut | |
| 345 | 92833 | Locking bolt | |
| 346 | 110254 | Bajonet cap, spring | |
| 347 | 92846 | Rivet 4x16 A2 | |
| 348 | 91224 | Bajonet cap, bottom part | |
| 349 | 102036 | Locking bolt | |
| 350 | 65868 | Stoppbolzen 65 mm lang | |
| 351 | 121751 | Removing bolt | |
| 352 | 6KS04X20E1775 | Rivet 4x20 A2 | |
| 353 | 121761 | Center support bolt | |
| 354 | 6M080000E0934 | Nut M8, stainless steel | |
| 355 | 121746 | Nozzle fixing screw M4xl0 | |
| 356 | 6M06X010E0933 | Hexagonal screw M6 | |
| 357 | 23572 | Servo drive with resolver | |
| 358 | 6ZR2250-5M-15 | Tooth belt 2250-5M-15 | |
| 359 | 6GUMPUF50302 | Rubber-metal buffer | |
| 360 | 164213 | Drive motor with connecting lead | |
| 361 | 164219 | Pump shaft | |
| 362 | 6LAP40-15FD-T | Bearing | |
| 363 | 164220 | Blast wheel | |
| 364 | 164226 | Threaded bolt | |
| 365 | 256979 | Adjusting foot X 2 | |
| 366 | 208191 | Energy chain X 3 | |
| 367 | 206599 | Guide wagon X | |
| 368 | 206598 | Fixation screw M12 | |
| 369 | 254961 | Guide rail | |
| 370 | 209052 | Y-Straight support | |
| 371 | 6SER-A300471 | Locking ring A30 | |
| 372 | 206369 | Electric cylinder,stroke 170 | |
| 373 | WC12.82.188 | Cylindriclpin | |
| 374 | 6ZRO325-5M-15 | Tooth belt POWER GRIP HTD | |
| 375 | 216492 | Knurled roller 0 50 mm | |
| 376 | 209306 | Trolley | |
| 377 | 6LR048-16-06 | Slilde roller | |
| 378 | 216359 | Fixing bolt, long, 0 = 8 mm | |
| 379 | 216360 | Fixing bolt, long, 0 = 12 mm | |
| 380 | 139072 | Bajonet cap, bottom part | |
| 381 | 12555 | Extraction tool for solder nozzles (without image) | |
| 382 | 6ISK582005 | Box spanner SW13 | |
| 383 | 203919 | Plate heating element 1.4 kw, 230 V | |
| 384 | 203917 | Insulating 470x85x12 perforated | |
| 385 | 91957 | Graphite sealing | |
| 386 | 203601 | Hexagonal screw M6xl6 DIN 933 | |
| 387 | 203600 | Washer U06,4 QPQ DIN 125B | |
| 388 | 203924 | Ring heater 450 W | |
| 389 | 261977 | Fibre glass curtain | |
| 390 | 261934 | Coating for Sealing profile | |
| 391 | 232145 | Bulkhead-curtain | |
| 392 | 222564 | Cylinder with double piston 0 20, Stroke = 30 mm 150°C | |
| 393 | 6BO180 | Straight screwing | |
| 394 | 238786 | Cylinder with double piston CXSM Cylinder 015 H 25 | |
| 395 | 216028 | Cylinder, 0 32, stroke = 100 mm, Temp, resistant | |
| 396 | 6BO099 | Angular swivel screw connection | |
| 397 | 215643 | Guide profile WS 16 250 mm | |
| 398 | 196596 | One-way restrictor | |
| 399 | 216029 | Angle joint DIN 71802-M10-CS | |
| 400 | 215649 | Housing bearing WXUM-01-16 | |
| 401 | 6PLSIL10.0 | Plate, foam silicone, width = 10 mm | |
| 402 | 232171 | Round cord, foam silicone, 0 5 mm | |
| 403 | 232172 | Round cord, foam silicone, 0 12 mm | |
| 404 | 232173 | Round cord, foam silicone, 0 20 mm | |
| 405 | 189310 | Gassing hose | |
| 406 | 6SPH4X20E1481 | Clamping sleeve 4X20 V2A DIN 1481 | |
| 407 | 6FETL-C16 | Disk spring | |
| 408 | 209190 | Gauge-glass | |
| 409 | 255049 | Isolation | |
| 410 | 255088 | Reference nozzle | |
| 411 | 209661 | Graphite sealing | |
| 412 | 6BO116E | Straight screwing M5‘ stainless steel | |
| 413 | 6M03X003E0913 | Set screw M3 | |
| 414 | 296644 | Sealing ring | |
| 415 | 6B0102 | Angular swivel screw connection | |
| 416 | 153647 | Sealing ring, copper Gl/4 | |
| 417 | 322332 | Rope tool coding for down holder | |
| 418 | 322337 | Rope tool coding for nozzle plate | |
| 419 | 322336 | Rope tool coding for protection | |
| 420 | 302565 | One-way restrictor VFOH-LE-A-G18-Q4 | |
| 421 | 208090 | Sensorclip f. cylinder, 0 20 | |
| 422 | 208077 | Mounting for sensor | |
| 423 | 132240 | Insertion aid, fixed | |
| 424 | 312167 | Round zylinder double-act, heat resist., 0 20, stroke 80 | |
| 425 | 312166 | Plain bearing XFM-121418-059 | |
| 426 | 6LAKR16 | Curved Roller 0=16, w=ll, M6 | |
| 427 | 6LA628-6-2Z | Bearing 628/6-2Z 叩 to 90 °C | |
| 428 | 207006 | Fiber Optic Cable Reflex 161-238-204E40 | |
| 429 | 260794 | Electric cylinder ETH080M10 | |
| 430 | 261146 | Trolley | |
| 431 | 260107 | Plate heating element 2 kW, 230 V | |
| 432 | 260108 | Insulating 640x85x12, perforated | |
| 433 | 251090 | Cylinder with double piston XSM10-30-XB6 | |
| 434 | 261940 | Gassing hose | |
| 435 | 322421 | Rope tool coding for down holder-XL | |
| 436 | 322449 | Rope tool coding for nozzle plate-XL | |
| 437 | 322427 | Rope tool coding splash guard-XL | |
| 438 | 146053 | Gassing ring | |
| 439 | 154195 | Probe | |
| 440 | 6ZT00025A | Insulating | |
| 441 | 123746 | Graphite sealing ring | |
| 442 | 6EBSI0.8ATR | Microfuse 0,8A・T | |
| 443 | 6EBSI1.0A-T | Microfuse l,0A-T | |
| 444 | 6EBSI1.6A-T | Microfuse 1,6A-T | |
| 445 | 6EBSI2.0A-T | Microfuse 2,0A-T | |
| 446 | 6EBSI2.5A-T | Microfuse 2,5A-T | |
| 447 | 6EBSI4.0A-T | Microfuse 4,0A-T | |
| 448 | 6EBSI6.3A-T | Microfuse 6,3A-T | |
| 449 | 6RELOMRON-3 | Solid-state relay 600V 30A | |
| 450 | 23705 | Resolver cable, 10 m | |
| 451 | 23716 | Motor cable, 10 m | |
| 452 | 6EKABELVAU02 | SAC-4P10,0-PUR/M12FS cable | |
| 453 | 6EKABELVAU11 | SAC-3P-M12Y-2X-M 8FR-2L/PUR/5,。cable | |
| 454 | 6EKABELVAU15 | SAC-4P-M12MS-M12FS/PUR1,O cable | |
| 455 | 6EKABELVAU22 | S AC-4P-M12 MS-M12FR-PU R5,0 cable | |
| 456 | 6EKABELVAU27 | SAC-3P-M12MS-M8FR/PUR/3,0 cable | |
| 457 | 41745 | SAC-4P-5,0-PUR/M 8FS cable | |
| 458 | 123674 | SAC-4P-M12Y/2X0,3-PUR/M12FS VP cable | |
| 459 | 132221 | SAC-3P- 1,5-PUR/C-1L-S cable | |
| 460 | 147584 | SAC-3P-M12MS/5,0-PUR/M 8FR-2L cable | |
| 461 | 147813 | SAC-3P-M12MS/3,0-PUR/M12FS cable | |
| 462 | 151600 | SAC-3P-M12Y/2X3,0-PUR/M8FR-2L cable | |
| 463 | 161821 | SAC-3P-M12MS-M 8FS/6,0/PUR cable | |
| 464 | 6EKABELTOR-6M | TORSON Plug 10M TK-W-10 | |
| 465 | 6ELS-LK6 | Light conducting cable | |
| 466 | 70228 | Laser reflection sensor | |
| 467 | 95491 | Motor cable with plug, 12-pole | |
| 468 | 150539 | Cable for solenoid pump | |
| 469 | 6PLSIL1.0-50S | Silicone plate |
Előző:PANASONIC CM101 Parts list
Következő:Kurtz Ersa VERSAFLOW 3-35 Parts List
Kattintson a kapcsolatfelvételhez a WhatsApp-on