1.Streamlined assembly & inspection system for top-notch efficiency and quality output.
2. Handles large-scale boards and components with ease.
3. Dual-rail mounting (optional spec) boosts production density to new heights.
| Main specification | |
|---|---|
| Equipment type 1 | SMT equipment |
| Equipment type 2 | Mounting equipment |
| Equipment type 3 | Pick-and-place machine |
| Equipment size | W1280 mm × D2332 mm × H1444 mm |
| Equipment weight | 2 470 kg |
| Power source | 3-phase AC 200, 220, 380, 400, 420, 480 V |
| Gas source | 0.5 MPa、200 L /min（A.N.R.） |
| Base spec. | ||
|---|---|---|
| Environmental conditions | Temperature | 10 °C ~ 35 °C (Mounting head) 22 °C ~ 28 °C (Glue head) 10 °C ~ 28 °C (Checking head) |
| Environmental conditions | Humidity | 25 %RH ~ 75 %RH (No condensation) |
| Environmental conditions | Height | Altitude 1 000m below |
| Production data | Actual installation points | Max.10000 points/equipment, Max.10000 points/production line (Including actual installation coordinates, identification mark coordinates, defective mark coordinates, and substrate bending measurement points.) |
| Production data | Pattern(block)number | Max. 1000 pattern/device, Max. 1000 pattern/line (Including substrate bending measurement point, for Max. 100 pattern/device.) |
| Production data | Mark set the number of | Max. 1000 points/device, Max. 1000 points/lines |
| Elements mounting direction | -180° ~ 180° (0.01°Unit | NA |
| Basic performance | ||
|---|---|---|
| Project | Mount speed (perfect condition) | Placement accuracy(perfect condition) |
| Lightweight 16 nozzle placement head | 77000CPH(Chip:0.047s/chip) 70000CPH(Chip: 0.051s/chip) IPC9850(1608C):59200CPH/56000CPH | 1).0402, 0603,1005Mount±0.04mm:Cpk≧1 2).03015, 0402, 0603, 1005Mount±0.03 mm: Cpk≧1；±0.025 mm: Cpk≧1 |
| 12 nozzle placement head | 64500 CPH(Chip: 0.056 s/chip) 62500 CPH(Chip: 0.058 s/chip) | 0402, 0603, 1005Mount±0.04mm: Cpk≧1 ±0.03 mm: Cpk≧1 |
| Lightweight 8 nozzle placement head | 41600 CPH (Chip: 0.087 s/chip) | 1).0402, 0603,1005Mount±0.03mm:Cpk≧1 2).QFP Mount±0.05 mm: Cpk≧1(12 × 12 mm below),±0.03 mm: Cpk≧1(More than12×12mm~32×32mm below) |
| 3 nozzle placement head V2 | 16640 CPH(Chip: 0.217 s/chip) 13000 CPH(QFP: 0.277 s/QFP) | QFP Mount±0.03 mm: Cpk≧1 |
| Object element | ||
|---|---|---|
| Project | Element size | Element height |
| Lightweight 16 nozzle placement head | 03015 Chip~ 6 × 6 mm | Max.3mm |
| 12 nozzle placement head | 0402 chip~ 12 × 12 mm(over 6 × 6 mm element sorption limit.) | Max.6.5mm |
| Lightweight 8 nozzle placement head | 0402 chip to 32 × 32 mm (more than 12 × 12 mm element sorption limit.) | Max.12mm |
| 3 nozzle placement head V2 | 0603 Chip ~ 120 × 90 mm or150 × 25 mm | Max.30mm |
| Substrate | ||
|---|---|---|
| Substrate replacement time | Monorail conveyor belt | 2.3 s (L 350 mm) 4.4 s (L 350 mm above ~ L 450 mm) 5.2 s (L 450 mm above ~ L 750 mm or less) |
| Substrate replacement time | The dual-track conveyor | Dual mode: 0 s (when the cycle time is shorter than the substrate replacement time is not 0 s) monorail mode: 2.3 s (L 350 mm) 4.4 s (L 350 mm above ~ L 450 mm) 5.2 s (L 450 mm above ~ L 750 mm or less) |
| Monorail conveyor belt | Substrate size | 50 × 50 mm ~ 750 × 550 mm |
| Monorail conveyor belt | Possible mount range | 50 × 44 mm ~ 750 × 544 mm |
| Monorail conveyor belt | Substrate thickness | 0.3 mm ~ 8.0 mm |
| Monorail conveyor belt | Substrate weight | 3.0 kg or less (real post-installation state, including the carrier weight.) |
| Monorail conveyor belt | Flow direction | Left→Right, Left←Right (Select size) |
| The dual-track conveyor | Substrate size | Dual mode : 50 × 50 mm ~ 750 × 260 mm monorail mode: 50 × 50 mm ~ 750 × 510 mm |
| The dual-track conveyor | Possible mount range | Dual mode : 50 × 44 mm ~ 750 × 254 mm monorail mode: 50 × 44 mm ~ 750 × 504 mm |
| The dual-track conveyor | Substrate thickness | 0.3 mm ~ 8.0 mm |
| The dual-track conveyor | Substrate weight | 3.0 kg or less (real post-installation state, including the carrier weight.) |
| The dual-track conveyor | Flow direction | Left→Right, Left←Right (Select size) |
| The substrate transfer height | 900 mm ~ 920 mm | NA |
| Element supply unit | ||
|---|---|---|
| Taping | 4 mm | Max. 120 station : thin type single formula taping feeder |
| Taping | 8 mm | Max. 120 station : twin/thin type single formula taping feeder (small reel) Max. 60 station : twin/thin type single formula taping feeder (large reel) Max. 60 Station : single formula taping feeder |
| Taping | 12/16 mm | Max. 60 Station |
| Taping | 24/32 mm | Max. 30 Station |
| Taping | 44/56 mm | Max. 20 station |
| Taping | 72 mm | Max. 14 station : only 3 nozzle placement head |
| Taping | 88 mm | Max. 12 station : only 3 nozzle placement head |
| Taping | 104 mm | Max. 10 station : only 3 nozzle placement head |
| Single rod feeder | NA | Max. 30 Station : only 8 nozzle placement head,3 nozzle placement head |
| 3 station rod-shaped taping feeder | NA | Max. 14 station : only 8 nozzle placement head,3 nozzle placement head |
| Stacked Rod feeder(S/L) | NA | Max. 8 station : only 8 nozzle placement head, 3 nozzle placement head |
| Single tray | NA | Max. 20 : only 8 nozzle placement head,3 nozzle placement head |
| Double tray | NA | Max. 40 : only 8 nozzle placement head,3 nozzle placement head |
| Automatic feeder | NA | Max. 120 station: use the automatic feeder attachment |
