DrewTR7006LOnlineSPITin ointment thickness gauge,The size of each tin point can be measured quickly,Volume,Altitude and test short circuits.For small, small products,To avoid being small,Vibration when tin is small or products are used,The heat rises and freezes, causing poor exposure,Effective improvement of product quality;We can also screen for bad tin ointment in the early stages of the process,On the one hand, provide information in real time for the printing press to modify the parameters,While avoiding the continued processing of bad products online,Effective capacity enhancement and production reduction,Maintenance costs,Three times faster than the second high-speed online type3DTesterTR7600 SII,Mostly by useX-RayThe characteristics of the penetrating object show different images on camera,And with nine different angles,Can calculate and analyse images of upper- and lower-level overlapping components in isolation from images of different layers heights,We'll detect defects on the circuit board,Of courseBGAComponent and visual failure to detect provides a more advantageous solution.
| Main specification | |
|---|
| Brand | TRI |
| Model | TR7006L |
| Type 1 | SMT Equipment |
| Type 2 | SPI (Solder Paste Inspection) Machine |
| Type 3 | (Online) SPI Solder Paste Inspection |
| Size | 1000*940*2100mm |
| Weight | 600KG |
| Voltage | 220V Straight |
| Rated power | |
| Gas source | NA |
| Operating System | |
| Other | |
| Basic parameters | |
|---|
| CPUType | INTEL P4 3.2GHZ |
| Host Type | PC |
| DRAMCapacity | 2G |
| HARDISKCapacity | 120G |
| Number of light-source systems | LASER 1,CCD 1 |
| Inspect Sensor Head | 1individual |
| Transport belt plywood system model | Up and down |
| Pressure system | No need |
| Barcode Identification system | Yeah |
| Hardware plate reimbursement | Yeah,PlusMOTION PCTo adjustlaserMove up and down to compensate for it |
| Support Pin | Yeah |
| Use Temperature,Humidity | Temperature:15℃~35℃ Humidity:50％~70％ |
| Machine location accuracy | 20micro meter |
| Loading/Unloading(sec) | 2~3sec |
| Fiducial markProcess speed(sec) | Include during testing |
| A window check speed(sec) | base on 32*1280 resolution (0.0000625 sec) 1024*1280 (0.002 sec) |
| Checkable range per second | 2000mm² |
| Max PCB size(mm) | 330*250mm |
| PCBHigh Limit: TOP(mm) | 50mm |
| BOTTOM(mm) | 50mm |
| Pump(mm) | ±3mm |
| You can identify the smallest parts(pitch, size) | 0201Component |
| Minimum height can be identified(Min Height) | 15μｍ |
| Image Method(2D/3D) | 3D |
| Image Recognition Method | Grey-Sensei |
| Markable angles | Yeah |
| Part rotation angle | 0~360 |
